Hot and cold drink machine troubleshooting methods
timeļ¼2015-02-27
The following symptoms and treatment methods for small twin spray hot and cold drink machines, control methods are described below:
A two-cylinder or a cylinder does not pump failure treated water:
1. Check the impeller operating conditions, observe the impeller is working properly;2. Check the impeller condition, observe whether there is damage to the impeller and other anomalies;
3. Check the condition of the core sleeve to observe core sleeve for wear;
4. Check the condition of the pump and observe normal operation.
Second, the two-cylinder or a cylinder pump water but the water is not discharged from the tube Troubleshooting:4. Check the condition of the pump and observe normal operation.
1, when the beverage is less than 2L, need to increase beverage;
2, check the condition of the pump, if the pump is damaged, replace the pump;
3, check the pump fixed card status, if not in place then adjust.
If you press the above method still can not deal with failure, please do not force treatment, in order to avoid unnecessary losses, you can log in the East Bay refrigeration microMall, select the "micro-services - Online repair 'online repair, or contact the point of sale, you can also call service hotline, the fault status of the machine, model and serial number to tell each other, in order to facilitate repair.
